Options integrate those Zigbee gateway hubs with Home Assistant |

John

状态: 楼主
回帖总数: 6317

发表于: 2 年前

zigbee2mqtt

zigbee2mqtt是开源项目，能够将zigbee协议转换到mqtt，将广大的zigbee协议的设备接入智能家居平台。

目前官方推荐的硬件重，排在第一位的就是CC2652，官方提到了他“非常强大”，是目前Ti最强的芯片。

经过我的测试，的确信号和带机量都比CC2531

https://bbs.hassbian.com/thread-12421-1-1.html

最多的是插USB带天线的那种

用小米的门窗传感器改装雷达和激光传感器已经完美解决

zigbee2mqtt网关使用体验如何？能否分享一下，谢谢。
比如是否稳定？
有没有比较大的缺点？

想问下弄这个是不是要搭建自己的MQTT? 是的

现在家里的涂鸦zigbee设备渐多，为了避免以后各家zigbee设备加入进来，是否做一个z2m网关一劳永逸，家里现在就是一个米家多模，有点迷茫了

Z2m是可以体验物理连接般的速度，自己的网关和服务器，小米崩不崩溃有没有wifi都不影响你

根据大佬建议在闲鱼搜了z2m 3.0有线网关cc2652p zigbee2mqtt，大概卖139

John

状态: 楼主
回帖总数: 6317

私人讯息

发表于: 2 年前

#14367 引用

首先说下Zigbee2MQTT网关，这个网关目前常见的是各大神自制的，估计很多人和我一样，买Zigbee设备不可能买的是一家的，有可能这类产品小米的不错，另类产品是飞利浦的不错，或者易微联的，这就是涉及到他们每一家的产品Zigbee设备都需要他们自己家的网关，所以我现在家里就有易微联的网关、小米多模网关2、涂鸦的网关，

我是后面才了解到Zigbee2MQTT网关的，这个网关可以兼容所有设备，

同样的它目前比较多见的有两种，
一种是类似优盘直插的，一种是插网线的，

个人建议插网线的，插网线的比较稳定，不会无缘无故掉线，之所以我要用Zigbee2MQTT网关也是受不了最近易微联的Zigbee设备频繁掉线

How to integrate Aqara Multi Sensor into Home Assistant

https://leonardosmarthomemakers.com/how-to-integrate-aqara-multi-sensor-into-home-assistant/

Conbee II stick configured with Deconz

John

状态: 楼主
回帖总数: 6317

私人讯息

发表于: 2 年前

#16409 引用

I use an Intel NUC i3 with Proxmox running different VMs and one of them is the Smart Home. A ConBee ZigBee Stick and an Aeotec Z-Wave Stick are attached to the NUC to control all the ZigBee and Z-Wave devices. A Docker Host inside an Ubuntu Server VM builds the core of the Smart Home.

If you find any information here useful, feel free to buy me a coffee :)

https://github.com/Burningstone91/smart-home

John

状态: 楼主
回帖总数: 6317

私人讯息

发表于: 2 年前

#18738 引用

CC2652 ZigBee coordinator or OpenThread router

I actually reccommend the newer TI devices. Better range, more devices possible.

Like this https://www.tindie.com/products/slaesh/cc2652-zigbee-coordinator-or-openthread-router/?pt=ac_prod_search 53 and there is another one called zig zig ahh or something.

zigbee2mqtt是大家喜闻乐见的开源项目，能够将zigbee协议转换到mqtt，将广大的zigbee协议的设备接入智能家居平台。目前官方推荐的硬件重，排在第一位的就是CC2652，官方提到了他“非常强大”，是目前Ti最强的芯片。经过我的测试，的确信号和带机量都比CC2531好上了不少
https://bbs.hassbian.com/thread-12421-1-1.html

John

状态: 楼主
回帖总数: 6317

私人讯息

发表于: 1 年前

#20406 引用

CC2538

CC2538 + CC2592 is as good as CC26X2R1, and much much better than CC2531

I’m using a CC2538 + CC2592PA and the signal seems to be better than CC2531. By the way, it is unable to pair more than 16 router to this ZC for my case. I’ve tried 3 different CC2538 USB but same issue.

When trying to pair new router device from 17th, there is even no any “internview” or “annouced message” from the log of zigbee2mqtt. Have you got the same issue yet?

https://community.home-assistant.io/t/im-selling-zigbee2mqtt-stick-based-on-cc2538-cc2592-pa/177813/4

John

状态: 楼主
回帖总数: 6317

私人讯息

发表于: 1 年前

#20457 引用

I have used a CC2530+CC2591+ESP01 for about 2 years before I switched to a CC2652. Never had the same problems as with the Sonoff ZbBridge (I have one for testing, don’t use it for production) WiFi don’t seems a problem for the TI Chips, unlike the Silabs chips.

John