European plug

Install an Alternate OpenWRT firmware on DGNWG05LM and ZHWG11LM gateways

These instructions apply only to:

The European version of the gateway mieu01 from Xiaomi, with a European plug
A version of the gateway from Aqara ZHWG11LM, with a Chinese or European plug.
The instructions will not work for the Xiaomi gateway2 version, with the Chinese plug DGNWG02LM. That version has other hardware components installed.

https://openlumi.github.io/

https://github.com/openlumi/homeassistant_on_openwrt

he component uses internal UART to communicate with ZigBee chip. The chip has to be flashed with a proper firmware to be able to communicate with the HA.

You could try another Zigate firmwares for JN5169 chip. The baud rate must be 115200 as it is hardcoded in zigpy-zigate.