Install fireware on ESP32-S3-BOX-3B via Ready-Made Projects

Install fireware on ESP32-S3-BOX-3B via Ready-Made Projects
https://community.home-assistant.io/t/esp32-s3-box-3-why-is-this-so-difficult/729795/12?u=msly

I did the following:

Plugged device into a PC with USB OTG cable

Pointed web browser to Ready-Made Projects — ESPHome  https://esphome.io/projects/index.html

Selected my device type "ESP32-S3-BOX-3B"

Hit Connect, selected proper "USB JTAG COM" port, & hit Install.

A couple minutes later, I had a working voice assist satellite device, with working mic, speaker, and cutesy display.

I immediately asked it “Hey Nabu, turn off XX lights”